Telenetics Modems

Hardened industrial grade VDC power modems for communications solutions for Business, Utility and Industrial applications including Digital, dial up - leased line - cellular/cell modems.

New Product Release  

The "Born Again UDS 202T" Modem

  • Telenetics introduces the latest addition to the family of industrial grade, temperature hardened Modems, Model MOT202T. This 0-1800 bps leased telecom line or private wire modem is a pin-for-pin, form, fit and function replacement for Motorola Model RM16M. Telenetics recently signed a manufacturing license and distribution agreement with Motorola and acquired the remaining products of this bellwether modem.

jump to Born Again UDS/Motorola 202T modem

 

  •  A Fast Poll Modem that combines a 9600 bps, and 4800 bps 

    The Telenetics DSP9600 Flash Poll (DSP9600FP) modem is a 9600/4800 bps stand-alone modem designed for 4-wire full-duplex or 2-wire half-duplex operation over voice-band leased line. The DSP9600FP modem utilizes the latest digital-signal processing (DSP) technology to achieve high performance. The DSP9600FP modem also employs Telenetics' proprietary modulation and encoding scheme to achieve fast modem training time. These advantages make the DSP9600FP modem the most technologically advanced product on the market. It is especially suited for multi-point communication systems that require fast response time, short training time and low throughput delay.


jump to  DSP9600FP fast poll modem

Cellular 3-watt cellular transceiver

202T modems
(MIU202T, MIU202T LV & MIU202TPowerPort)

UDS "Born Again" 202T
Telenetics/UDS/Motorola 202T VDC modem

DSP9600FP fast poll modem
 A Fast Poll 9600 bps Modem 

9 to 16 Volt DC Power modems
MIUpowerPort series low power modem
with low power sleep mode 

48VAC/VDC to 220/240VAC/VDC modem
MIU, MIU-LV (Optional 9 to 36 Volt DC Power)

RF modems

PIN power line power modem
(300, 1,200, 2,400bps)

Rack Mount / Chassis

the MIU modem line

ARC ELECTRONICS
301-924-7400 EXT 25

jump to Home Page

jump to Related pages

MIU modem / AC, DC power
(Ask us about the new 202T DC powered modem)

HARDENED INDUSTRIAL GRADE MODEMS

  • .3/1.2/2.4/9.6/14.4 & 28.8kbps

  • 5VDC to 220VAC Power Supply

  • IEC801-4/5 Surge Protection

  • -40oC to +85oC Operating Temp.

  • RTU, Meters, Relays, SCADA

  • Solar Powered Applications

MIU MODEMS
300bps to 28.8kbps

AC/DC POWERED

Telenetics has designed modems that work in "remote" remote sites with very low failure rates. These devices work where other modems roll over and die. When a service call to a remote site can mean an all day trip these modems are the ideal solution.

 

To service the growing need for efficient, reliable data communications in the harsh environments of "remote" remote sites and industrial facilities. Telenetics has developed a family of data communications products that can operate from various AC & DC power supplies and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communications devices.

 

Dial-Up & Leased line

 

With the rapid move toward "intelligent" remote sites, where meters, relays, RTU’s, SCADA systems, etc. are able to "talk" via communications devices such as Cellular modems with out the conveniences of 115VAC power outlets and climate control.

Telenetics Corp., a leader in the "industrial" communications market place, has developed a range of communication devices designed specifically to operate reliably in these harsh environments.

Telenetics has designed modems that work in "remote" remote sites with very low failure rates. These devices work where other modems roll over and die. When a service call to a remote site can mean an all day trip these modems are the ideal solution.

The MIU2.4, 9.6, 14.4 and 28.8 are highly sophisticated full duplex, Bell 103, Bell 212A, V.22bis, V.32bis or V.34 data/fax modems that are designed to interface with RS232, 5V logic (TTL) or simple send and receive signals. They operate at full or half duplex on dial-up or 2-wire leased line systems. 4-wire leased line models are also available.

These modems are powered from a patented power supply that enables them to operate on any voltage from 9 to 36VDC or  48 to 220VAC or DC. They are also designed to work in temperatures ranging from -40oC to +85oC, and are surge protected to double the voltage requirements of IEC801-4.

Options include RS422 and RS485 interfaces, 5/12/24/48VDC power supply, and additional surge protection (IEC801-5).

The MIU units require very little power making them ideal for solar powered applications

Technical

Specifications

MIU2.4

MIU9.6

MIU14.4

MIU28.8

LDM

Module

FO

Module
Modem Line Speeds:

Asynchronous

2400, 1200, 300bps

2400, 1200, 300bps

14400, 9600, 4800, 2400, 1200, 300bps

28800, 14400, 9600, 4800, 2400, 1200, 300bps

n/a

n/a
DTE Rates:

2400, 1200, 300bps

19200, 9600, 4800bps

with data

compression

57.6, 38.4,

19.2kbps

with data

compression

115.2, 57.6, 38.4, 19.2kbps

with data

compression

 Channel 1:

57.6kbps (1 mile)

19.2kbps (3 miles)

Channel 2:

2400bps(3 miles)

Assumes 24AWG

 19200bps

up to 2.5 miles
Modulation V.22bis

V.22

Bell 212A

Bell 103

Fax available on special order

 V.22bis

V.22

Bell 212A

Bell 103

Group III Fax *

V.29, V.27Ter

 V.32bis, V.32 V.22bis, V.22 Bell212A

Bell103

Group III Fax *

V.29, V.27Ter

 V.34

V.32bis, V.32 V.22bis, V.22

Bell212A

Bell103

Group III Fax *

V.29, V.27Ter

n/a

n/a
Dial Up and

MIU2.4

MIU9.6

MIU14.4

MIU28.8

n/a

n/a
2 & 4 Wire Leased Line

n/a

MIU9.6L

MIU14.4L

n/a

 n/a  n/a
Compatibility

Hayes™ Extended AT Command Set

n/a

n/a
Error Correction/

Data Compression

None

MNP 2, 4, 5 & 10

V.42, V.42bis

n/a

n/a
Power Supply

48VAC/DC to 220VAC/DC (Optional 9 to 36VDC - use "LV" Low Voltage)
Power Connector

3-Pin with Screw Terminals for Customer Supplied Cable

(Cable available from Telenetics if required)
Size

5-3/8" x 4" x 1-3/8"
Data Port

RS232 with DB9 Connector
Telco Ports

RJ11

n/a
Surge Protection

(Power Line)

8kV [Exceeds IEC801-4]

(20kV [IEC801-5] available if required)
Surge Protection

(Telco/Interconnect)

5kVac

5kVac

3.75kVac

3.75kVac

2.5kVac

Infinite
Operating Environment

-40oC to +85oC, 0 to 95% humidity (non-condensing)
Certifications

FCC Part 68 Class A, Industry Canada

Low Voltage Option LV (9 to 36VDC )

* Fax not available on 4-wire leased line models

...Standard Features...

 

Model

Serial Interface

Power Supply

Power Connection

Options

Available

(SeeTable Below)
MIU2.4

MIU9.6

MIU14.4

MIU28.8

RS232

48-220VAC or VDC

"LV" option
LOW VOLTAGE
9 to 36VDC

3-Pin Connector

without cable

1, 2, 3, 4,

5, 7

(Ask us about the new 202T DC powered modem)


Voltage Supply:

Standard Model:
MIU 40 to 270VDC 40 to 270VAC, 50/60Hz
LV Model (Suffix "-LV"): 9 to 36VDC

Current Requirements:

MIU2.4:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 65mA 27mA 7.5mA 6.5mA 5.5mA

MIU9.6:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 115mA 57mA 11mA 10mA 9mA

MIU14.4:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 160mA 69mA 14mA 12mA 9mA

MIU28.8:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 205mA 125mA 16mA 15mA 11mA

 Surge Protection: Power Supply: 8kVrms

Analog Line: 5kVac (MIU2.4 & 9.6) - 3.75kVac (MIU14.4 & 28.8)

Available Options...

Item

Description

Order Suffix

1

 RS422 Serial Interface

-422

2

 RS485 Serial Interface

-485

3

 9 to 36VAC/DC Power Supply

-LV

4

 4 Foot Power Cable

-C

5

 4 Foot Power Cable (High Surge)

-HC

6

 Type ST Fiber Optic Cable Connections

-ST

7

 Auto Dialer

-AD

 

Order Code Example: MIU2.4-485-LV-AD

 

2400bps Modem

With Optional RS485 Interface

With Optional 9-36VDC Power Supply

With Optional Auto-Dialer

ARC ELECTRONICS