MIU Modem VDC power

Hardened Industrial Grade modem for Business, Utility and Industrial applications including Digital, dial up - leased line - cellular/cell modems.


VDC & VAC POWERED modem

Telenetics DC powered Hardened Industrial Grade are designed to work in "remote" remote sites with very low failure rates. These Hardened Industrial Grade modems work where other modems roll over and die. When a service call to a remote site can mean an all day trip these modems are the ideal solution.

jump to related Telenetics pages

(Ask us about the new 202T DC powered modem)

  • .3/1.2/2.4/9.6/14.4 & 28.8kbps

  • 5VDC to 220/240VAC Power Supply

  • IEC801-4/5 Surge Protection

  • -40oC to +85oC Operating Temp.

  • RTU, Meters, Relays, SCADA

  • Solar Powered Applications

MIU24 MIU144 MIU288
MIU24LV MIU144LV MIU288LV

MODEMS
300bps to 28.8kbps

To service the growing need for efficient, reliable data communications in the harsh environments of "remote" remote sites and industrial facilities. Telenetics has developed a family of data communications products that can operate from various AC & DC power supplies and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communications devices.


Dial-Up & Leased line

With the rapid move toward "intelligent" remote sites, where meters, relays, RTU’s, SCADA systems, etc. are able to "talk" via communications devices such as Cellular modems with out the conveniences of 115VAC power outlets and climate control.

Telenetics Corp., a leader in the "industrial" communications market place, has developed a range of communication devices designed specifically to operate reliably in these harsh environments.

Telenetics has designed modems that work in "remote" remote sites with very low failure rates. These devices work where other modems roll over and die. When a service call to a remote site can mean an all day trip these modems are the ideal solution.

The MIU2.4, MIU9.6, MIU14.4 and MIU28.8 are highly sophisticated full duplex, Bell 103, Bell 212A, V.22bis, V.32bis or V.34 data/fax modems that are designed to interface with RS232, 5V logic (TTL) or simple send and receive signals. They operate at full or half duplex on dial-up or 2-wire leased line systems. 4-wire leased line models are also available.

These modems are powered from a patented power supply that enables them to operate on any voltage from 9 to 36VDC or  48 to 220VAC or DC. They are also designed to work in temperatures ranging from -40oC to +85oC, and are surge protected to double the voltage requirements of IEC801-4.

Options include RS422 and RS485 interfaces, 5/12/24/48VDC power supply, and additional surge protection (IEC801-5).

jump to MIU202T modem   or    jump to  "Born Again UDS 202T modem

Technical

Specifications

MIU2.4

MIU9.6

MIU14.4

MIU28.8

Modem Line Speeds:

Asynchronous

2400, 1200, 300bps

2400, 1200, 300bps

14400, 9600, 4800, 2400, 1200, 300bps

28800, 14400, 9600, 4800, 2400, 1200, 300bps

DTE Rates:

2400, 1200, 300bps

19200, 9600, 4800bps
with data
compression

57.6, 38.4, 19.2kbps
with data
compression

115.2, 57.6, 38.4,
 19.2kbps with data compression

Modulation V.22bis
V.22
Bell 212A
Bell 103
V.22bis, V.22
Bell 212A
Bell 103
V.32bis, V.32 V.22bis, V.22 Bell212A
Bell103
V.34 V.32bis, 
V.22bis, V.22
Bell212A
Bell103
Dial Up and

MIU2.4

MIU9.6

MIU14.4

MIU28.8

2 & 4 Wire Leased Line

n/a

MIU9.6L

MIU14.4L

n/a

Compatibility

Hayes™ Extended AT Command Set

Error Correction/

Data Compression

None

MNP 2, 4, 5 & 10

V.42, V.42bis

Power Supply

48VAC/DC to 220VAC/DC (Optional 9 to 36VDC - use "LV" Low Voltage)

Power Connector

3-Pin with Screw Terminals for Customer Supplied Cable

(Cable available from Telenetics if required)

Size

5-3/8" x 4" x 1-3/8"

Data Port

RS232 with DB9 Connector

Telco Ports

RJ11

Surge Protection

(Power Line)

8kV [Exceeds IEC801-4]

(20kV [IEC801-5] available if required)

Surge Protection

(Telco/Interconnect)

5kVac

5kVac

3.75kVac

3.75kVac

Operating Environment

-40oC to +85oC, 0 to 95% humidity (non-condensing)

Certifications

FCC Part 68 Class A, Industry Canada

Low Voltage Option LV (9 to 36VDC )

* Fax not available on 4-wire leased line models

...Standard Features...

 

Model

Serial Interface

Power Supply

Power Connection

Options
Available

(SeeTable Below)

MIU2.4

MIU9.6

MIU14.4

MIU28.8

RS232

48-220VAC or VDC

"LV" option
LOW VOLTAGE
9 to 36VDC

3-Pin Connector

without cable

1, 2, 3, 4,

5, 7

(Ask us about the new 202T DC powered modem)


Voltage Supply:

Standard Model:
MIU 40 to 270VDC 40 to 270VAC, 50/60Hz
LV Model
(Suffix "-LV"): 9 to 36VDC

(Suffix "-LV"): 9 to 36VDC

Current Requirements:

MIU2.4:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 65mA 27mA 7.5mA 6.5mA 5.5mA

MIU9.6:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 115mA 57mA 11mA 10mA 9mA

MIU14.4:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 160mA 69mA 14mA 12mA 9mA

MIU28.8:

  • 12VDC 24VDC 125VDC 120VAC 220VAC
  • 205mA 125mA 16mA 15mA 11mA

 Surge Protection: Power Supply: 8kVrms

Analog Line: 5kVac (MIU2.4 & 9.6) - 3.75kVac (MIU14.4 & 28.8)

Available Options...

Item

Description

Order Suffix

1

RS422 Serial Interface

-422

2

RS485 Serial Interface

-485

3

9 to 36VAC/DC Power Supply

-LV

4

4 Foot Power Cable

-C

5

4 Foot Power Cable (High Surge)

-HC

6

Type ST Fiber Optic Cable Connections

-ST

7

Auto Dialer

-AD

 

 

Telenetics Network Products

 

Standalone Modems

 

Telenetics' industrial grade modems individually suited for dial up and leased line applications. Unless otherwise specified, standard voltage is 48 to 220 VAC or DC.  For low voltage option (9-36VDC) add "-LV" to Model number.

 MIU2.4 

V.22bis, 2400 bps Dial-up Modem

 MIU9.6FPD 

9600 bps, Digital Fast Poll Modem 

MIU9.6FPD/R

9600 bps, Digital Fast Poll Modem Repeater

 MIU14.4 

V.32.bis,14.4 Kbps Dial-up Modem

 MIU14.4L 

V.32.bis, 14.4 Kbps LL Modem W/ EC,DC 2/4 Wire Lease

 MIU14.4EL 

V.29 9600 bps, or V33, 14400 bps Leased-Line Modem W/O DC, EC 4 Wire

 MIU23 

V23, 1200 bps, LL Modem

 MIU28.8 

V.34 28.8 Kbps Dial Up Modem

 MIU202T 

Bell 202T, 1200 bps LL Modem 

MIU56

Industrial Grade V.90, 56K Dial / 33.6K LL Remote Configuration, Password Security with Voice Alert Alarms

MIU LDM

Limited Distance Modem (Short Haul)

 DSP9612FP 

1200/4800/9600 bps LL Fast Poll Modem.  Point-to-Point or Multi-Point applications.  85-265 VAC or 85-400 VDC Version Standalone. Bell 202T Combatible in 1200bps mode

 DSP9612-LV 

1200/4800/9600 bps LL Fast Poll Modem.  Point-to-Point or Multi-Point applications.  10-53 VDC Version Standalone. Bell 202T Combatible in 1200bps mode

 DSP9612RM 

1200/4800/9600 bps LL Fast Poll Modem. Rack Mount version  (RM16 Nest). Bell 202T Combatible in 1200bps mode

LV

add -LV suffix to MIU Series for Low Voltage option 9 to 36 VDC 

 

Options and Accessories for Standalone Modems

 Cable-C-001 

Optional Power Cable, four feet 

 LSS1 

Line Surge Suppressor

 MIU/MTGK 

Surface Wall or Panel Mounting Kit 

 RS485Ext25 

External RS485 interface unit, DB25 Pin, male, 4 screw terminal for line

 RS485Ext 9 

External RS485 interface unit, DB9 Pin, male, 4 screw terminal for line

 

 

 


see PDF of MIU/MTGK mounting kit


ARC ELECTRONICS
1-800-926-0226

jump to ... Home Page

arc@arcelect.com