Multi-Mode Fiber to Single-Mode fiber Converter

Universal MultiMode Fiber to SingleMode fiber Converter
Gigabit Ethernet GbE, OC3, OC12, OC48, STM1, STM4 and STM16
100Mbps to 2.5Gbps

Key features

· Data Rate: 100Mbps to 2.5Gbps

· Network extension: up to 50 miles
(75 miles for Gigabit Ethernet)

· Universal protocol transparent device

· Remote Firmware upgrade

· Status and Diagnostics LED

· SNMP managed (via MetroStar)

see the MetroStar Rack spec page

Universal Fiber Converter/ Extender

The MSM2500U module card series for the MetroStar Rack System provides the network designer with a flexible, cost effective and trouble-free tool for MM/SM to SM conversion and network extension. The MSM2500U is a universal, protocol transparent device. The module converts digital signals from multi-mode/single-mode to single-mode fibers and covers distances of 80km (50 miles) and 120km (75 miles) for GbE (data rate is from 100Mbps to 2.5Gbps).

The MSM2500U module card needs two Small Form Pluggable (SFP) optical interfaces which makes.

     These Small Form Pluggable (SFP) optical interfaces
     fit in the MSM2500U card. The MSM2500U card is part of
     the MetroStar Rack System and the UCON-2500 series
     Universal Multi-Mode to Single-Mode Media Converter can be
     used at remote end of the fiber run.

The main advantages of the hot-swappable SFP optical interfaces are the density, flexibility and cost savings. SFP modules can be easily interchange, thus fiber optic networks can be upgraded more conveniently than with traditional modules.

Module’s deployment is easy and does not require any settings or measurements.

The MSM2500U is protocol independent for the specified transmission speed and efficiently support Fast Ethernet, Gigabit Ethernet, OC3, OC12, OC48, STM1, STM4 and STM16.

All MetroStar modules are hot swappable and equipped with two self-clinching screws for easy and safe module insertion and removal. A special LED indicates that the module is well inserted in its slot and “alive” even before links are connected.

Key features

· Data Rate: 100Mbps to 2.5Gbps

· Network extension: up to 50 miles
(75 miles for Gigabit Ethernet)

· Universal protocol transparent device

· Remote Firmware upgrade

· Status and Diagnostics LED

· SNMP managed (via MetroStar)

Management Functions

· Port 1 and 2 Signal Detect Status

· Port 1 and 2 Transmit low indication on fiber optic port

· Port Disconnect

· Remote firmware upgrade

· Alarm reporting

MetroStar SFP Modules and MSM2500U Card

for more specs on the modules see SFP Modules page

General Specifications -

Standard Compliance:

Fast Ethernet (100Base-FX), Gigabit Ethernet (1000Base-SX/LX), OC3, OC12, OC48, STM-1, STM-4, STM-16

Conversion Method:

Protocol Transparent

Diagnostics:

Power On/Off – Green LED

SD: Signal Detect Port 1

SD: Signal Detect Port 2

TR-LO: lit red indicates port 1 transmit power low

TR-LO: lit red indicates port 2 transmit power low

F/O Ports:

> Small Form Pluggable hot-swappable
dual LC connectors

> Each F/O port may be disconnected via
management

Ordering Information for SFP (Small Form Pluggable) module

Part Number	Model	Description
2519	MSM2500U	Universal Extender module, 100Mbps to 2.5Gbps, includes 2 SFP slots, uses SFP transceiver in section
B248	SF1G-T	SFP (Small Form Pluggable) module GBE STP transceiver, 1000BaseT, shielded RJ-45, 100m over Cat.6 cable
B235	SF1G-S1	SFP module, GBE F/O transceiver, dual LC connector, m/m 850nm, 220/550m
B236	SF1G-LX1	SFP module, GBE F/O transceiver, dual LC connector, s/m 1310nm, 10km
B237	SF1G-LX2	SFP module, GBE F/O transceiver, dual LC connector, s/m 1310nm, 20km
B238	SF1G-LX3	SFP module, GBE F/O transceiver, dual LC connector, s/m 1550nm/DFB , 40km
B239	SF1G-LX4	SFP module, GBE F/O transceiver, dual LC connector, s/m 1550nm/DFB , 80km
B240	SF1G-LX5	SFP module, GBE F/O transceiver, dual LC connector, s/m 1550nm/DFB/ APD , 120km
B243	SF1G-LF13	SFP module, Single Fiber Strand GBE F/O transceiver, LC connector, s/m 1310nmTx – 1550nmRx, 40km
B244	SF1G-LF15	SFP module, Single Fiber Strand GBE F/O transceiver, LC connector, s/m 1550nmDFB Tx – 1310nm Rx, 40km
B249	SF2G-S2	SFP module, 2.5Gbps F/O transceiver, dual LC connector, s/m 1310nm, 2 km
B250	SF2G-LX2-3	SFP module, 2.5Gbps F/O transceiver, dual LC connector, s/m 1310nm DFB, 15 km
B251	SF2G-LX2-5	SFP module, 2.5Gbps F/O transceiver, dual LC connector, s/m 1550nm DFB, 15 km
B252	SF2G-LX3-3	SFP module, 2.5Gbps F/O transceiver, dual LC connector, s/m 1310nm DFB/APD, 40 km
B253	SF2G-LX3-5	SFP module, 2.5Gbps F/O transceiver, dual LC connector, s/m 1550nm DFB, 40 km
B254	SF2G-LX4-5	SFP module, 2.5Gbps F/O transceiver, dual LC connector, s/m 1550nm DFB/APD, 80 km
B258	SF2G-LX4-5C-47	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1471nm DFB/APD, 80 km
B259	SF2G-LX4-5C-49	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1491nm DFB/APD, 80 km
B260	SF2G-LX4-5C-51	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1511nm DFB/APD, 80 km
B261	SF2G-LX4-5C-53	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1531nm DFB/APD, 80 km
B262	SF2G-LX4-5C-55	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1551nm DFB/APD, 80 km
B263	SF2G-LX4-5C-57	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1571nm DFB/APD, 80 km
B264	SF2G-LX4-5C-59	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1591nm DFB/APD, 80 km
B265	SF2G-LX4-5C-61	CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, s/m 1611nm DFB/APD, 80 km

for more specs on the modules see SFP Modules page

for more specs on the MetroStar Rack

for more specs on the UCON-2500 series
Universal Multi-Mode to Single-Mode Media Converter can be used at remote end of the fiber run.

see other Fibrolan Media Converters

ARC ELECTRONICS
301-924-7400 EXT 25

jump to ... Home Page

arc@arcelect.com