|
Gigabit Ethernet GbE, OC3, OC12, OC48, Universal MultiMode Fiber to SingleMode fiber Converter |
Stand Alone Universal Multi-Mode
Fiber to Single-Mode fiber Converter
Gigabit Ethernet GbE, OC3, OC12, OC48, STM1, STM4 and STM16
100Mbps to 2.5Gbps
Key features· Data Rate: 100Mbps to 2.5Gbps · Network Extension: up to 80Km (120Km for GBE) · Universal protocol transparent device · Status and Diagnostic LEDs · Optional DC Power Supply (PS48) · Hot swappable Small Form-factor Pluggable transceivers |
|
The U.CON2500 provides the
network designer with a flexible and cost effective device for optical signals
conversion and network extension. The U.CON2500 is a universal protocol
transparent device. The unit covers distances up to 80km and 120km for GBE.
Data rate is from 100Mbps to 2.5Gbps.
It is equipped with two Small Form-factor Pluggable (SFP) optical interfaces for ease of deployment, maintenance and logistics.
The main advantages of the hot-swappable SFP optical interfaces are the density, flexibility, and cost savings. SFP devices can be easily interchanged, thus fiber optic networks can be upgraded more conveniently than with traditional devices.
Device’s deployment is easy
and does not require any settings or measurements.
U.CON2500 units may be used with SFP SM F/O ports for network extension or wavelength conversion.
The device is protocol
independent for the specified transmission speed and efficiently supports Fast
Ethernet, Gigabit Ethernet, OC3, OC12, OC48, STM1, STM4, and STM16.
The UCON2500 is housed in a compact yet rugged chassis allowing both desktop and shelf mounting and powered by an internal auto-ranging power supply.
General Specifications
|
Standard Compliance: Fast Ethernet (100Base-FX), Gigabit Ethernet, OC3, OC12, OC48, STM-1, STM-4, STM-16 |
Conversion Method: Protocol Transparent |
|
Diagnostic LEDs: Power On/Off (green LED) SD: Signal Detect port 1 (green LED) SD: Signal Detect port 2 (green LED) TX-LOW LED for Port 1 and Port 2: OFF = Transmission is OK LIT RED = Transmission signal low (does not reach the required distance ) Blinking = Authentication invalid: implies that not a FibroLAN SFP is used (no TX will take place |
F/O Ports: Small Form-factor Pluggable hot-swappable dual LC connectors Refer to "Ordering Information" for SFP optical transceivers (see specs page) Power Supply
Internal
100 ÷ 240VAC 50÷60Hz |
|
Operating Temperature: 0° ÷ +45° C Storage Temperature: -20 ¸ + 80°C Humidity: 10 ¸ 90% non-condensing |
Safety - designed to meet: EN60950 EMC - designed to meet: FCC part 15,Subpart B, class A VCCI Class B; ICES 003: 1997, Class A EMC Directive 89/336/EEC |
|
Dimensions: 120x170x40mm |
Weight:500 gram |
Ordering Information
|
PN# |
Model |
Description |
|
B266 |
U.CON2500 |
Universal Extender
module, 100Mbps to 2.5Gbps, includes 2 SFP slots, |
|
B289 |
SFP (Small Form-factor Pluggable) OC3, Single Fiber Strand (SFS), F/O transceiver, LC connector, SM, 1550nmTx/1310nmRx,15 km |
|
|
B290 |
SF155-SMRF13 |
SFP, OC3 ,SFS F/O transceiver, LC connector, SM 1310nmTx/1550nmRx,15 km |
|
B235 |
SF1G-S1 |
SFP module, GBE F/O transceiver, dual LC connector, MM 850nm, 220/550m |
|
B236 |
SF1G-LX1 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1310nm, 10km |
|
B237 |
SF1G-LX2 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1310nm, 20km |
|
B238 |
SF1G-LX3 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1550nm/DFB , 40km |
|
B239 |
SF1G-LX4 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1550nm/DFB , 80km |
|
B240 |
SF1G-LX5 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1550nm/DFB/ APD, 120km |
|
B241 |
SF1G-SF13 |
SFP module, SFS, GBE F/O transceiver, 1* LC, SM 1310nm Tx/1550nm Rx, 20km |
|
B242 |
SF1G-SF15 |
SFP module, SFS, GBE, F/O transceiver, 1*LC, SM 1550nmDFB Tx/1310nm Rx, 20km |
|
B243 |
SF1G-LF13 |
SFP module, SFS, GBE F/O transceiver, 1* LC, SM 1310nmDFB Tx/1550nm Rx, 40km |
|
B244 |
SF1G-LF15 |
SFP module, SFS, GBE F/O transceiver, 1*LC, SM 1550nmDFB Tx/1310nm Rx, 40km |
|
B269 |
SF1G-ZF49 |
SFP, SFS, GBE F/O transceiver, LC connector, SM, 1490nmDFB Tx/1550nm Rx, 80km |
|
B270 |
SF1G-ZF57 |
SFP, SFS, GBE F/O transceiver, LC connector, SM 1550nmDFB Tx/1490nm Rx, 80km |
|
B281 |
SF1G-LX5-5C-47 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1471nm DFB/APD, 120km |
|
B282 |
SF1G-LX5-5C-49 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1491nm DFB/APD,120km |
|
B283 |
SF1G-LX5-5C-51 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1511nm DFB/APD,120 km |
|
B284 |
SF1G-LX5-5C-53 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1531nm DFB/APD,120 km |
|
B285 |
SF1G-LX5-5C-55 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1551nm DFB/APD,120km |
|
B286 |
SF1G-LX5-5C-57 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1571nm DFB/APD,120km |
|
B287 |
SF1G-LX5-5C-59 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1591nm DFB/APD,120 km |
|
B288 |
SF1G-LX5-5C-61 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1611nm DFB/APD,120km |
|
B268 |
SF2G-S1 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, MM 850nm, 300/400m |
for more specs on the modules see
SFP Modules page
also see the
MetroStar MSM2500U
Card
for more specs on the
MetroStar Rack
see other Fibrolan Media Converters
ARC ELECTRONICS
301-924-7400 EXT 25
jump to ... Home Page
arc@arcelect.com
