T1 to Fiber Extender Converter Modem

Features

Remote unit in-band management
Local or Remote Loopbacks on copper or fiber in software mode

Loopback switch facilitates local installation

Converts the copper ports on T1/E1 devices, such as a PBX or T1/E1 Router, to multimode or single mode fiber

Switch selectable RJ-48 connectors for T1 or E1

Jitter attenuators optimize Bit Error Rate (BER) performance

Network debug procedures make BER testing more convenient

Built-in troubleshooting with the addition of a selectable TAOS (Transmit All Ones) switch on the fiber and copper interfaces allows the network engineer to test all T1/E1 equipment on that network segment and ensure the network link

Dry relay contacts enable the media converter to be tied into a separate alarm circuit commonly found in a T1/E1 twisted pair environment. Contacts will be activated on loss of power or loss of fiber link.

LED provides Alarm Indication Signal (AIS)

Can be used with fractional T1/E1 circuits

Ordering Information
Product Number	Port One	Port Two
ASSDTF1011-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	850nm multimode (ST) [2 km/1.2 miles]
ASSDTF1012-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1310nm single mode (ST) [8 km/5 miles]
ASSDTF1013-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	850nm multimode (SC) [2 km/1.2 miles]
ASSDTF1014-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1310nm single mode (SC) [20 km/12.4 miles]
ASSDTF1015-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1310nm single mode (SC) [40 km/24.9 miles]
ASSDTF1016-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1310nm single mode (SC) [60 km/37.3 miles]
ASSDTF1017-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1550nm single mode (SC) [80 km/49.7 miles]
ASSDTF1018-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1300nm multimode (MT-RJ) [2 km/1.2 miles]
ASSDTF1022-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1310nm single mode (ST) [15 km/9.3 miles]
ASSDTF1027-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1300nm multimode (ST) [5 km/3.1 miles]
ASSDTF3011-115	(2) Coax (BNC) [100 m/328 ft.]	850nm multimode (ST) [2 km/1.2 miles]
ASSDTF3012-115	(2) Coax (BNC) [100 m/328 ft.]	1310nm single mode (ST) [8 km/5 miles]
ASSDTF3013-115	(2) Coax (BNC) [100 m/328 ft.]	850nm multimode (SC) [2 km/1.2 miles]
ASSDTF3014-115	(2) Coax (BNC) [100 m/328 ft.]	1310nm single mode (SC) [20 km/12.4 miles]
ASSDTF3015-115	(2) Coax (BNC) [100 m/328 ft.]	1310nm single mode (SC) [40 km/24.9 miles]
ASSDTF3016-115	(2) Coax (BNC) [100 m/328 ft.]	1310nm single mode (SC) [60 km/37.3 miles]
ASSDTF3017-115	(2) Coax (BNC) [100 m/328 ft.]	1550nm single mode (SC) [80 km/49.7 miles]
ASSDTF3018-115	(2) Coax (BNC) [100 m/328 ft.]	1300nm multimode (MT-RJ) [2 km/1.2 miles]
ASSDTF3022-115	(2) Coax (BNC) [100 m/328 ft.]	1310nm single mode (ST) [15 km/9.3 miles]
ASSDTF3027-115	(2) Coax (BNC) [100 m/328 ft.]	1300nm multimode (ST) [5 km/3.1 miles]

Single Fiber Products (recommended use in pairs)
ASSDTF1029-105	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1310nm TX / 1550nm RX single fiber single mode (SC) [20 km/12.4 miles]
ASSDTF1029-106	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1550nm TX / 1310nm RX single fiber single mode (SC) [20 km/12.4 miles]
ASSDTF1029-107	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1310nm TX / 1550nm RX single fiber single mode (SC) [40 km/24.9 miles]
ASSDTF1029-108	Twisted Pair (RJ-48) [1.5 km / 0.9 mi.]	1550nm TX / 1310nm RX single fiber single mode (SC) [40 km/24.9 miles]
ASSDTF3029-115	(2) Coax (BNC) [100 m/328 ft.]	1310nm TX / 1550nm RX single fiber single mode (SC) [20 km/12.4 miles]
ASSDTF3029-116	(2) Coax (BNC) [100 m/328 ft.]	1550nm TX / 1310nm RX single fiber single mode (SC) [20 km/12.4 miles]
ASSDTF3029-117	(2) Coax (BNC) [100 m/328 ft.]	1310nm TX / 1550nm RX single fiber single mode (SC) [40 km/24.9 miles]
ASSDTF3029-118	(2) Coax (BNC) [100 m/328 ft.]	1550nm TX / 1310nm RX single fiber single mode (SC) [40 km/24.9 miles]