Environmentally-Hardened Fiber modem

Fiber Optic modems for industrial environments
The IFS D9110 D9120 D9130 D9210 D9220 D9230 fiber modem

Robust Design Assures Extremely High Reliability In Unconditioned Out-of-Plant/Roadside Environments. Exceeds NEMA TS-1/TS-2 & Caltrans Traffic Signal Control Equipment Environmental Specifications For Operating Temperature, Humidity, Shock, Vibration and Voltage Transient Protection


DESCRIPTION

The IFS D9200 series consists of fully-digital transceiver units designed for implementing point-to-point or star traffic signalization/ communications networks where hardware or software considerations require that the full RS-232 complement of data and handshaking/ control signals be transmitted optically. Full-duplex data transmission over one optical fiber using integrated wave division multiplexing is optionally available for those networks where the fiber count may be limited. These environmentally-hardened units are ideal for use in unconditioned out-of-plant or roadside installations. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and these units are available in either stand-alone or rack mount configurations.


APPLICATION EXAMPLES


FEATURES


Ordering Information for the IFS D9110 D9120 D9130 D9210 D9220 D9230


SPECIFICATIONS

DATA

 

Data Interface:

RS-232 C/D with Full-Handshake Capability

Data Rate:

DC to 50 kbps

Signals Supported:

1. Transmit Data (TD)

 

2. Receive Data (RD)

 

3. Signal Return/Ground (SG)

 

4. Request To Send (RTS)

 

5. Clear to Send (CTS)

 

6. Data Terminal Ready (DTR)

 

7. Data Set Ready (DSR)

 

8. Data Carrier Detect (DCD)

Operating Mode:

Asynchronous, Simplex or Full-Duplex

Bit Error Rate:

<1 in 10-9 @ Maximum Optical Loss

 

Budget

 

 

WAVELENGTH

1300 nm, 1300/1550 Single Mode

 

850 or 1300 nm, Multimode

 

 

NUMBER OFFIBERS

1 or 2 (see ordering information)

 

 

OPTICAL EMITTER

Laser Diode (1300 nm, single mode)

 

LED (850 or 1300 nm, multimode)

 

 

LED INDICATORS

1. Transmitted Data(TD)

 

2. Received Data(RD)

 

3. Data Terminal Ready(DTR)

 

4. Data Set Ready(DSR)

 

5. Clear To Send(CTS)

 

6. Request To Send(RTS)

 

7. Optical transmit Link Valid

 

8. Optical Receive Link Valid

 

9.Operating Power

 

CONNECTORS

 

Power:

Terminal Plug with Screw Clamps*

Data:

Type DB-25S

Optical:

Type ST, SC or FC

 

(see ordering information)

 

 

ELECTRICAL& MECHANICAL

Power:

12 VDC @ 250 mA,

Number of Rack Slots:

1

Current Protection:

Automatic Re-settable Solid-State Current

 

Limiters

Circuit Board:

Meets IPC Standard

Size (in./ cm.) (LxWxH):

7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.

Shipping Weight:

< 2 lbs./0.9 kg

 

 

ENVIRONMENTAL

 

MTBF:

>100,000 hours

Operating Temp:

-40 C to +74 C, ambient

Storage Temp:

-40 C to +85 C, ambient

Relative Humidity:

0% to 95% (non-condensing)**

 

 

* Optional type DB-9P: Specify connector style at time of order.

 

 

** May be extended to condensation conditions by adding suffix Cto model number for conformal coating.

RS-232 TRANSCEIVERS (DB25 DATA CONNECTOR)
D9110E   MM RS232: DATA TCVR, MM, 2 FIBERS, DB25
D9110E-R3   MM RS232: DATA TCVR, MM, 2 FIBERS, DB25, RM
D9110EWDMA   MM RS232: DATA TCVR, MM, 1 FIBER, DB25, "A" END
D9110EWDMA-R3   MM RS232: DATA TCVR, MM, 1 FIBER, DB25, "A" END, RM
D9110EWDMB   MM RS232: DATA TCVR, MM, 1 FIBER, DB25, "B" END
D9110EWDMB-R3   MM RS232: DATA TCVR, MM, 1 FIBER, DB25, "B" END, RM
D9120E   MM RS232: DATA TCVR, MM, 2 FIBERS, DB25, LD
D9120E-R3   MM RS232: DATA TCVR, MM, 2 FIBERS, DB25, LD, RM
D9130E   SM RS232: DATA TCVR, SM LASER, 2 FIBERS, DB25
D9130E-R3   SM RS232: DATA TCVR, SM LASER, 2 FIBERS, DB25, RM
D9130EWDMA   SM RS232: DATA TCVR, SM LASER, 1 FIBER, DB25, "A" END
D9130EWDMA-R3   SM RS232: DATA TCVR, SM LASER, 1 FIBER, DB25, "A" END, RM
D9130EWDMB   SM RS232: DATA TCVR, SM LASER, 1 FIBER, DB25, "B" END
D9130EWDMB-R3   SM RS232: DATA TCVR, SM LASER, 1 FIBER, DB25, "B" END, RM
                NOTE:  To order optional battery backup add suffix "-B" to part number and $50 (net).
       
RS232 REPEATERS (DB25 DATA CONNECTOR)
D9110   MM RS232: DATA REPEATER, MM, 2 FIBERS, DB25
D9110-R3   MM RS232: DATA REPEATER, MM, 2 FIBERS, DB25, RM
D9110WDM   MM RS232: DATA REPEATER, MM, 1 FIBER, DB25
D9110WDM-R3   MM RS232: DATA REPEATER, MM, 1 FIBER, DB25, RM
D9120   MM RS232: DATA REPEATER, MM, 2 FIBERS, DB25, LD
D9120-R3   MM RS232: DATA REPEATER, MM, 2 FIBERS, DB25, LD, RM
D9130   SM RS232: DATA REPEATER, SM LASER, 2 FIBERS, DB25
D9130-R3   SM RS232: DATA REPEATER, SM LASER, 2 FIBERS, DB25, RM
D9130WDM   SM RS232: DATA REPEATER, SM LASER, 1 FIBER, DB25
D9130WDM-R3   SM RS232: DATA REPEATER, SM LASER, 1 FIBER, DB25, RM
                NOTE:  To order optional battery backup add suffix "-B" to part number and $50 (net).
       
RS232 WITH CONTROL LINES
D9210   MM RS232 (CONTROL LINES): DATA TCVR, MM, 2 FIBERS
D9210-R3   MM RS232 (CONTROL LINES): DATA TCVR, MM, 2 FIBERS, RM
D9210WDMA   MM RS232 (CONTROL LINES): DATA TCVR, MM, 1 FIBER, "A" END
D9210WDMA-R3   MM RS232 (CONTROL LINES): DATA TCVR, MM, 1 FIBERS, "A" END, RM
D9210WDMB   MM RS232 (CONTROL LINES): DATA TCVR, MM, 1 FIBER, "B" END
D9210WDMB-R3   MM RS232 (CONTROL LINES): DATA TCVR, MM, 1 FIBERS, "B" END, RM
D9220   MM RS232 (CONTROL LINES): DATA TCVR, MM, 2 FIBERS, LD
D9220-R3   MM RS232 (CONTROL LINES): DATA TCVR, MM, 2 FIBERS, LD, RM
D9230   SM RS232 (CONTROL LINES): DATA TCVR, SM LASER, 2 FIBERS
D9230-R3   SM RS232 (CONTROL LINES): DATA TCVR, SM LASER, 2 FIBERS, RM
D9230WDMA   SM RS232 (CONTROL LINES): DATA TCVR, SM LASER, 1 FIBER, "A" END
D9230WDMA-R3   SM RS232 (CONT. LINES): DATA TCVR, SM LASER, 1 FIBERS, "A" END, RM
D9230WDMB   SM RS232 (CONTROL LINES): DATA TCVR, SM LASER, 1 FIBER, "B" END
D9230WDMB-R3   SM RS232 (CONT. LINES): DATA TCVR, SM LASER, 1 FIBERS, "B" END, RM

see other IFS Fiber equipment pages

see other Fiber equipment pages

see related fiber pages


jump to Fiber info -  a Tutorial


ARC ELECTRONICS
1-800-926-0226

jump to ... Home Page

arc@arcelect.com