| Extreme Temperature Harden Fiber Ethernet Converter |
10/100BaseT(X) to 100BaseFX Extreme Temperature
Harden Fiber Ethernet Converter
12VDC - 24VDC - 48VDC Volt DC powered - Designed for reliable and stable
operation in harsh industrial environments
|
 |
Industrial Media Converter AIMC-101, which is specially designed for reliable and stable operation in harsh industrial environments, provides industrial grade media conversion between 10/100BaseT(X) and 100BaseFX. Its reliable industrial design is excellent for keeping your industrial automation applications running continuously, and comes with a relay output warning alarm to help prevent damage and loss.
AIMC-101 has been designed for use in harsh industrial environments, such as in hazardous locations (class 1 division 2 or zone 2), and complies with FCC, TÜV, UL, and CE standards. The AIMC-101 Series is available in models that support an operating temperature of 0 to 60°C, and an extended operating temperature of -40 to 75°C. In addition, AIMC-101 products are subjected to a 100% burn-in test, guaranteeing that they can be used in industrial automation control environments.
Link Fault Pass-Through
AIMC-101's "Link Fault Pass-Through" feature overcomes a problem encountered when using traditional media converters. The problem is this. When one side of the link fails, the other side continues transmitting packets, and then waits for a response that never arrives from the disconnected side. What AIMC-101 does is force the link to shut down as soon as it notices that the other link has failed, giving the application software a chance to react to the situation.
Redundant Power Inputs
AIMC-101 provides two power inputs that can be connected simultaneously to live DC power sources. If one power input fails, the other source acts as a backup, and automatically satisfies AIMC-101's power needs.
Relay Output Alarm by Port Break, Power Failure
AIMC-101 provides relay contact outputs to warn technicians on the shop floor when the power fails or a port link is disconnected, so they can respond quickly with appropriate emergency operation procedures.
Supports Link Fault Pass-Through
Supports 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
Multi-mode and single-mode, with SC or ST connectors available
Power failure, port break alarm by relay output
Standard operating temperature (0 to 60°C) and extended operating temperature (-40 to 75°C) models available
For hazardous location (Class 1 Div. 2/Zone 2)
Long haul transmit distance of 40 km or 80 km
Specifications
Standard
IEEE802.3, 802.3u, Link Fault Pass-Through
Interface
RJ45 ports 10/100BaseT(X)
Fiber
ports
100BaseFX (SC, ST connectors available)
LED
Indicators
Power, Fault, 10/100, Full/Half Duplex, Collision
Dip
Switch
100BaseFX Full/Half duplex selection, Port break alarm mask
Alarm
Contact
One relay output with current carrying capacity of 1A @ 24 VDC
Optical Fiber
Distance Multi mode:
0 to 5 km, 1310 nm (50/125µm, 800 MHz*km)
0 to 4 km, 1310nm (62.5/125µm, 500 MHz*km)
Distance
Single mode:
0 to 15 km, 1310nm (9/125µm, 3.5 PS/(nm*km))
0 to 40 km, 1310nm (9/125µm, 3.5 PS/(nm*km))
0 to 80 km, 1550nm (9/125µm, 19 PS/(nm*km))
Min. TX
Output
Mulit mode: -20 dBm
Single mode: 0 to 15 km, -15 dBm; 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm
Max. TX
Output
Mulit mode: -14 dBm
Single mode: 0 to 15 km, -6 dBm; 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm
Sensitivity
-36 to -32 dBm (IMC-101-M), -34 to -32 dBm (IMC-101-S)
Power
Input
Voltage
24 VDC (12 to 48 VDC); Redundant inputs
Input
Current
0.2A @ 24V
Connection
Removable Terminal Block
Overload
Current Protection
1.1A
Reverse
Polarity Protection
Present
Mechanical
Casing
IP30 protection, aluminum case
Weight
0.63 kg
Dimensions (W x H x D)
53.6 x 135 x 105 mm
Installation
DIN-Rail, Wall Mounting
Environmental
Operating Temperature
0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for -T models
Storage
Temperature
-40 to 85°C (-40 to 185°F)
Ambient
Relative Humidity
5 to 90% (non-condensing)
Regulatory Approvals
Safety
UL60950 (E212360), UL 508, CSA C22.2 No. 60950, EN60950
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
Shock
IEC 60068-2-27
Free
Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
810,000 hours
Data
Base
MIL-HDBK-217F, GB
Warranty
5 years
Hazardous location
| UL/cUL Class 1, Division 2, Groups A, B, C and D (E238559)
ATEX Class 1, Zone 2, EEx nC IIC (03CA24537)
Standard
Operating Temperature Models (0 to 60°C)
AIMC-101-M-SC
Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC
fiber connector
AIMC-101-M-ST
Industrial 10/100BaseT(X )to 100BaseFX media converter, multi mode, ST
fiber connector
AIMC-101-S-SC
Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC
fiber connector
All items include User's Manual
Extended Operating Temperature Models (-40 to 75°C)
AIMC-101-M-SC-T
Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC
fiber connector
AIMC-101-M-ST-T
Industrial 10/100BaseT(X )to 100BaseFX media converter, multi mode, ST
fiber connector
AIMC-101-S-SC-T
Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC
fiber connector
All items include User's Manual
Optional Accessories
WK-46
Wall Mounting Kit
SC to SC
connector
Optical Fiber Patch cord, full duplex Multi Mode 62.5 micron (1 meter,3
meter,5 meter,10 meter)
ST to ST
connector
Optical Fiber Patch cord, full duplex Multi Mode 62.5 micron (1 meter,3
meter,5 meter,10 meter)
also see ----
SCADA data communication converters and hubs
SCADA
RS232, RS422, RS485 to TCP/IP TCP, UDP, IP,
ICMP, ARP, RARP,
IP Telnet
Converters
and Switching Hubs. Flexible 12, 24, 48, 125 VDC and 115, 220/230 50Hz power -
with high and low temperature ratings
also see ---- SCADA Data Commutations Products
ARC ELECTRONICS
1-800-926-0226
jump to ...
Home
Page
arc@arcelect.com