Rhino Channel Bank Specifications


Rhino Channel Banks
 

A Rhino channel bank offers several solutions for T1 connectivity. Rhino channel banks are feature rich and are specifically designed for ease of use and maintenance.

Every Rhino channel bank will configure itself to the T1 when plugged in and powered up. Also standard with each Rhino Channel bank is a 4 line by 40-character LCD display. This display in conjunction with the four menu buttons can be used to manually configure your channel bank if your installation calls for a more specific needs. I

Every system comes with a fractional V.35 data port
(for free) that can be used for the IP router connection. If you have unused DS0 time slots you can use that band width for IP connectivity.

A Rhino channel banks feature a single CSU (for free) that is software controlled, software programmed and will self boot to the proper mode right out of the box.

Now, with our new modular channel bank, you can custom build a Rhino channel bank to your exact specifications. Dont need a full 24 line channel bank? No problem. Build your channel bank in four channel increments. Need to combine FXS and FXO lines into one channel bank? Again, not a problem. You can mix and match FXS and FXO cards also in four line increments into one Rhino chassis.
 


Features for the Rhino channel bank


T1 CSU
All Rhino channel banks feature a single CSU that is software controlled, software programmed and will self boot to the proper mode right out of the box.

 

T1 Channel Bank Specifications
___________________
Features
  • 4x40 LCD real time status display shows independent AB bit signaling
  • Automatic T1 configuration using artificial intelligence software, no configuration switches
  • CSU auto detects T1 modes: D4 or ESF, AMI or B8ZS
  • T1 CSU via RJ48 jackC, with line buildout programability
  • Internal power supply module, no external components
  • FLASH based system configuration storage
  • V.35 fractional data interface, 56k or 64k
  • Slef-diagnostics, verbose error reporting, loopback modes
  • Single channel configuration, each channel may have a different signaling protocol, line current or gain
  • Telco network uptime and downtime history
  • Remote connection via RS-232c or Rthernet(optional) via Windows based graphical interface
  • Field software upgradable
  • 19", 23" or wall mounting kit standard
  • T1 and analog cables included
  • Immediate, Wink, Loop, Ground, Kewl and three DID start protocols
  • Distinctive ring in Loop start mode
  • Caller ID enabled in Loop start mode
  • Low cost fully populated FXS, fully populated FXO or modular FXS/FXO mixed mode capable
  • 110V AC, 220V AC and -48V DC modular power supply models
  • 5-year limited warranty
___________________
T1 CSU

All Rhino channel banks feature a single CSu that is software controlled. software programmable and will self-configure to the proper mode right out of the box.
____________________
Analog Interfaces

The Rhino channel bank provides either FXS or FXO analog interfaces, both with digital technology that utilizes a dedicated Digital Signal Processor (DSP) for monitoring real-time line characteristics.

FXS - The Rhino FXS analog interface provides standard battery and ringing voltages to each of up to 24 loop start analog channels.

Each channel provides:

  • Digital DSP
  • Line current limit from 18ma to 45mA
  • Tx and Rx gain control of -5db to +6db
  • Power down control from 1 to 3 secs.
  • Ring cadence control

FXO - The Rhino FXO analog interface requires a standard POTs analog telephone line up to 24 inputs.

Each channel provides:

  • Digital DSP
  • Tx and Rx gain control of -15db to +12db
  • Ring cadence monitoring timer

FXS/FXO Modules - The Rhino modular channel bank model allows for installation of wither a 4-channel FXS or FXO analog daughtercard. If the four slots are to be used as data, there is no need to instal an analog card.

Size: 305" tall (2u), 17" wide and 8.5" deep
Weight: 12 pounds

___________________
Rhino Models
  • CB24-FXS-110V - T1, 24 FXS analog channels, 110VAC
  • CB24-FXS-220V - T1, 24 FXS analog channels, 220VAC
  • CB24-FXS-48V - T1, 24 FXS analog channels, -48VDC
  • CB24-FXO-110V - T1, 24 FXO analog channels, 110VAC
  • CB24-FXO-220V - T1, 24 FXO analog channels, 220VAC
  • CB24-FXO-48V - T1, 24 FXO analog channels, -48VDC
  • CB24-MOD-110V - T1, 4 - 24 FXS/FXO analog channels, 110VAC
  • CB24-MOD-220V - T1, 4 - 24 FXS/FXO analog channels, 220VAC
  • CB24-MOD-48V - T1, 4 - 24 FXS/FXO analog channels, -48VDC

The modular RHino channel bank can be orded with 4 to 24 channels of either FXS or FXO analog channels installed in increments of four channels up to six modules.

All Rhino channel banks xome in 110VAC, 220VAC or -48VDC models. The internal power supply can easily be swapped.


Rhino Models
CB24-FXS-110V - T1, 24 FXS analog channels, 110VAC
CB24-FXS-220V - T1, 24 FXS analog channels, 220VAC
CB24-FXS--48V - T1, 24 FXS analog channels, -48VDC
CB24-FXO-110V - T1, 24 FXS analog channels, 110VAC
CB24-FXO-220V - T1, 24 FXS analog channels, 220VAC
CB24-FXO--48V - T1, 24 FXS analog channels, -48VDC
CB24-MOD-110V - T1, 4-24 FXS/FXO analog channels, 110VAC
CB24-MOD-220V - T1, 4-24 FXS/FXO analog channels, 220VAC
CB24-MOD--48V - T1, 4-24 FXS/FXO analog channels, -48VDC

FXS port conigurations
4 Channels 
8 Channels 
12 Channels 
16 Channels 
20 Channels 
24 Channels 
FXO port conigurations
4 Channels 
8 Channels 
12 Channels 
16 Channels
20 Channels 
24 Channels 
Mixed Mode ports conigurations
4 FXS, 4 FXO channels 
4 FXS, 8 FXO channels
4 FXS, 12 FXO channels 
4 FXS, 16 FXO channels 
4 FXS, 20 FXO channels 
8 FXS, 4 FXO channels
8 FXS, 8 FXO channels 
8 FXS, 12 FXO channels 
8 FXS, 16 FXO channels 
12 FXS, 4 FXO channels 
12 FXS, 8 FXO channels 
12 FXS, 12 FXO channels 
16 FXS, 4 FXO channels 
16 FXS, 8 FXO channels 
20 FXS, 4 FXO channels 
Modular Build Assignments
Channels 1-4 5-8 9-12 13-16


The modular Rhino channel banks can be ordered with four to 24 channels of either FXS or FXO analog channels installed, in increments of four channels, up to six modules.

All Rhino channel banks come in 110VAC, 220VAC or -48V DC models, The internal power supply module can easily be swapped.


see Rhino page       see manual PDF


    ARC ELECTRONICS
301-924-7400 EXT 25

jump to ... Home Page

arc@arcelect.com