Canoga Perkins 8829

The Canoga Perkins 8829 is especially suited for the long-distance extension of full-duplex LAN segments. A Link Loss Forwarding (LLF) fiber break propagation feature allows optical signal loss at the receiver to be sensed as a UTP loss by the connected UTP port management agent. The 8829 supports 850nm MMF, 1310nm SMF, and 1550nm SMF optics, and works with all popular sizes of single and multimode fiber optic cable. These include 8-10/125, 50/125 and 62.5/125µ. The 8829 is equipped with an AC power adapter.


 Canoga Perkins 8829 features

  • Extends UTP Segments Up to 100km

  • Provides Noise/Interference Immunity

  • Full-duplex or Half-duplex Operation

  • 850nm MMF, 1310nm and 1550nm SMF Support

  • ST and FC/PC Connectors

  • Link Loss Forwarding (LLF) Fiber Break Propagation to UTP

  • Rack-mountable in Optional 9101 LAN Chassis

  • Transparent Support for IEEE 802.1q and Cisco™ ISL Tagged

  • VLAN Packets

  • NEBS Level 3 Tested and Certified (in 9101 Chassis)

 


8829
UTP-to-Fiber Media Converter


The  Canoga Perkins 8829 UTP-to-Fiber Media Converter extends 10BASE-T UTP segments with fiber optic cable. The 8829 interconnects switches or stations located up to 100km from each other in full-duplex mode, or 3km in half-duplex mode.

The 8829 can be used as a standalone device, or it can be rack mounted into an optional 9101 LAN Chassis. The 9101 Chassis is available with 120/240VAC or -48VDC power supplies for use with powered media converters. It is designed to accommodate a mix of up to twelve rack mounted modules.

Modules supported in the Model 9101 LAN Chassis:

Model 8829 Media Converter
Model 9119 Fast Ethernet Media Converter
Model 9120 Gigabit Ethernet Media Converter
Model 9125 1 Gigabit Fibre Channel Xtender
Model WA-2 Passive WDM Modules
 

Specifications

PHYSICAL  
Dimensions  
1.12"H x 3.5"W x 6.0"D
(28 x 89 x 152mm)
Weight  
Approximately 8 oz (0.227kg)
RACKMOUNTED  
Model 9101 LAN Chassis
Supports Twelve 8829 Media Converters
OPERATING ENVIRONMENT
Temperature  
0° to 50°C  
Humidity  
Up to 90% (Noncondensing)
POWER  
Standalone  
120/240VAC, 50/60Hz, 10W Max.
Rackmounted  
5W Max.  
CONNECTORS  
Copper  
10BASE-T 8-pin Jack (RJ-45)
Fiber  
ST, FC/PC  
MEDIA SWITCH  
NORMAL (MDI)  
XOVER (MDIX)  
DIAGNOSTIC LEDs  
PWR Power
FIBER LNK Fiber Interface Integrity Link
Rx Receive Data (Fiber to UTP)
Tx Transmit Data (UTP to Fiber)
JAB Jabber
UTP LNK UTP Interface Integrity Link
POL UTP Receive Polarity Reversed
 

jump to other Canoga Perkins products

jump to other Fiber Optic products


ARC ELECTRONICS
1-800-926-0226

jump to ... Home Page

arc@arcelect.com