8 Port Industrial DC Powered - Temp Rated 
  8-Port 10/100Mbps Industrial Fast Ethernet Switch
for Wide Temperature Operation and
12 to 48VDC power - with DIN and Wall Mount

 

  •                Layer 2 Features
    Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Ethernet standard
  • Supports Auto-Negotiation and 10/100Mbps half / full duplex mode
  • High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering
    eliminates erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
    Backplane (Switching Fabric): 1.6Gbps
  • Integrated address look-up engine, supports 2K absolute MAC addresses
  • Automatic address learning and address aging
    CSMA / CD Protocol

 

  Industrial DC Powered - Temp Rated
Industrial area Switch for data collection and forwarding
The ISW-801T equips with 8 10/100Mbps ports that offers auto MDI / MDIX feature, 1.6Gbps non-blocking switch fabric and the 2K MAC Address table, therefore, it can perform wire-speed packets transfer without risk of packet loss. The DCE-AISW801T with the slim type IP 30 metal case protection is ideal for most Heavy Industrial demanding environments
 
 
After DCE-AISW801T series Fast Ethernet Switch / Converter products being popular, DCE now releases the advanced industrial hardened Fast Ethernet Switch series with slim type, IP-30 metal case. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space. The DCE-AISW801T, one of the new series model, equips with 8 10/100Mbps auto negotiation ports and operates reliably in Heavy Industrial demanding environments.

Stable operate performance under difficult environments. The DCE-AISW801T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 Degree C, the DCE-AISW801T can be placed in almost any difficult environment. The DCE-AISW801T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.

Industrial Rated Switch performance
The DCE-AISW801T offers high performance switch architecture. With the 8 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1.6Gbps and the 2K MAC Address table, the ISW-801T can perform wire-speed packets transfer without risk of packet loss. The flow control function enables the ISW-801T to provide fast and reliable data transfer.

All of the RJ-45 copper interfaces in the DCE-AISW801T support 10/100Mbps Auto-Negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard Auto-MDI / MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.


Ordering Information
DCE-AISW801T 8-Port 10/100Mbps Industrial Fast Ethernet Switch (-40~75 Degree C operating temperature)
 

 
Hardware Specification
10/100Base-TX Ports 8
Dimension (W x D x H) 135 x 87 x 32 mm
Weight 454g
Power Requirement 12~48 VDC, Redundant power with polarity reverse protection function
Power Consumption / Dissipation 11.6 Watts / 39BTU
Installation DIN rail kit and wall mount ear
Alarm Provides one relay output for power fail
Alarm Relay current carry ability: 3A @ DC 30V
Switch Specification
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Switch fabric 1.6Gbps
Throughput (packet per second) 1.19Mpps
Network cables 10/100Base-TX:
Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.)
EIA / TIA-568 100-ohm STP (100meters, max.)
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full-duplex flow control
Regulation Compliance FCC Part 15 Class A, CE
Stability testing IEC60068-2-32(Free fall),IEC60068-2-27(Shock),IEC60068-2-6(Vibration)
Environmental Specification
Temperature Operating: -40~75 Degree C
Storage: -40~75 Degree C
Humidity Operating: 5~90%
Storage: 5~90% (Non-condensing)
 

ARC ELECTRONICS
1-800-926-0226

jump to ... Home Page

arc@arcelect.com